The winds of change…
…are blowing through amateur radio station G0RIF! I have made the decision to finally commit to getting a radio that I believe will be with me for a very long time, a Yaesu FT-950 (pictured). The reason? Digital IF filtering! For too long I have put up with adjacent channel interference, even with the 500Hz filter in the TS-480. With the FT-950 (with the PEP updates) this will be [mostly*] a thing of the past.
In addition I am now moving to a ’single radio setup’ with a single interface unit (MyDel SB-2000) for PSK31 and other soundcard data modes, FSK RTTY, CW keying and rig control.
Yaesu FT-950 HF/6m transceiver |
 |
To that end I have agreed a sale on my TS-480SAT that has been a faithful servant for the past few years, mainly used for RTTY and CW. Other gear for sale includes my LDG AT-200Pro auto antenna tuner, my SignaLink USB radio interface, my Rigblaster Plug & Play radio interface and my Yaesu FT-857 radio, used primarily for portable operating. |
The net result of this change will be that I have one radio (the FT-950) with one interface unit (the SB-2000) and one antenna tuner (the SEM Tranzmatch - see earlier posts for details). The FT-897D currently in use as the primary PSK31 set (and standby HF rig) will then be used for portable work (as and when required) and will retain it’s role as a spare HF set.
* I do accept that even modern digital IF filtering has its limitations and that there will still be occasional circumstances where signals are so close together (or when one is particularly strong) when interference may still occur. I believe that such occurences will be significantly fewer with the FT-950 than with the TS-480.